Help!

This is where you enter the width of your blind.

Help!

This is where you enter the drop of your blind.

Help!

You have the option to pick whichever units you feel most comfortable with, just simply select either millimetres (mm), Centimetres (cm) or Inches (inch).

Help!

This is simply the number of blinds you require.

Help!

Exact
If you tell us your exact blind size we will make no deductions and it will come to this exact size. This measurement is usually taken when fitting outside recess

We recommend the overlap is 64mm (2.5") each side and at the top and bottom. Please see drawing: Recess
All you need to do is measure tight inside the recess (wall to wall) and we will make deductions for you to ensure the blind fits inside the recess. The standard blind deduction we make is 10mm (we will take this off for you) Please see diagram below:

Help!

You have options to decide where you would like your controls to be and how you would like your verticals to be positioned.

One Way

Right One Way - This means the controls will be on the right hand side and the slats will stack on the right hand side
Left One Way - This means the controls will be on the left hand side and the slats will stack on the left hand side

Splits:

Right Split - This means the controls will be on the right hand side and the slats will split in the middle
Left Split - This means the controls will be on the left hand side and the slats will split in the middle

Help!

Window Fix
This simply means you will be screwing the brackets directly into the window frame.

Roof Fix
This simply means the brackets will be screwed up into the roof.

Help!

You have options to decide where you would like your controls to be and how you would like your verticals to be positioned.

One Way

Right One Way - This means the controls will be on the right hand side and the slats will stack on the right hand side
Left One Way - This means the controls will be on the left hand side and the slats will stack on the left hand side

Splits:

Right Split - This means the controls will be on the right hand side and the slats will split in the middle
Left Split - This means the controls will be on the left hand side and the slats will split in the middle

Help!

Help!

Help!

Exact
If you tell us your exact blind size we will make no deductions and it will come to this exact size. This measurement is usually taken when fitting outside recess

We recommend the overlap is 64mm (2.5") each side and at the top and bottom. Please see drawing: Recess
All you need to do is measure tight inside the recess (wall to wall) and we will make deductions for you to ensure the blind fits inside the recess. The standard blind deduction we make is 10mm (we will take this off for you) Please see diagram below:

Help!

You are required to measure the bead depth of your window frame. This is simply the measurement from your glass to the front of your window frame. We offer 4 bracket sizes of 18mm, 20mm, 24mm and 30mm. Here are some diagram instruction to help you measure and we have also provided a step by step video:

Before you choose Perfect Fit blinds

• Ensure your windows frames are uPVC
• Ensure there is a 6mm clearance all around the outside of your window beading (the uPVC frame) to allow enough room for the Perfect Fit framework.
• Check that the seals of your window do not protrude more than 6mm over the glass. (The seal is the black rubber strip between the glass and the window frame).

If your windows do not meet the above criteria your windows will not be suitable for Perfect Fit blinds. If they do use the instructions below.

Measure for your blind in just a few steps. You’ll need:

• A tape measure – metal ones are best
• A pencil and paper – to write down your measurements

When You Measure

• You can measure for your blind in millimetres, centimetres or inches. Measure to the nearest millimetre if you’re using centimetres.
• Whatever type of blind you’re measuring for, follow our instructions precisely and don’t make any adjustments for fittings and headrails.
• Look out for the position of window handles and tiles.

STEP 1

Measure the width and drop of the visible glass area of your window in 3 places, the top, middle and bottom. Write down the shortest measurement.

STEP 2

Measure the depth of the window from the face of the window frame to the glass (this is normally 18mm, 20mm or 24mm) and write this down. This measurement is needed for choosing the correct bracket size.

Video Deomonstration

Help!

Help!

This means the size of the slat size is as follows: 35mm (1 and half inch), 50mm (2 inch).

Help!

Help!